Guest VLANProvides a browser-based environment for authenticated clients, similar to IEEE 802.1X.Private VLAN (PVLAN)Increases network security by enabling virtual organization of devices regardless of their physical location, and improves performance by reducing traffic congestion.Management VLANSegments traffic to and from management interfaces, including CLI/Telnet, the web interface, and SNMP.
Supported protocols and standards
STP, MSTP, RSTP, PVST+, RPVST+, MVRPSupports IEEE 802.1D STP, IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) for faster convergence, and IEEE 802.1s MSTP (Multiple Spanning Tree Protocol). Additionally, it supports Per-VLAN Spanning Tree (PVST+) and Rapid Per-VLAN Spanning Tree (RPVST+), which improves bandwidth utilization and accelerates convergence. MVRP enables automatic learning and dynamic VLAN assignment.Rapid Ring Protection Protocol (RRPP)A protocol specific to Ethernet ring topologies, designed to prevent broadcast storms and ensure rapid topology convergence, typically under 50 ms. Supports 8 instances and 16 rings.Bridge Protocol Data Unit (BPDU) TunnelingEnables the transparent transmission of STP BPDU frames, allowing for correct spanning tree calculation across carrier networks, WANs, or MANs.
QoS
Advanced Classifier-Based QoSClassifies network traffic using multiple matching criteria based on information from OSI Layers 2, 3, and 4; enables the application of QoS policies such as setting priority levels and limiting bandwidth for selected traffic on a port, VLAN, or the entire switch.
Security
Secure BootVerifies digital signatures to prevent unauthorized or malicious software from running during system startup.Access Control Lists (ACLs)Provides Layer 2 to Layer 4 (IP) traffic filtering; supports global ACLs, VLAN-specific ACLs, port-specific ACLs, and IPv6-specific ACLs.IEEE 802.1XA standard user authentication method that uses an 802.1X client (supplicant) on the end device in conjunction with a RADIUS server.RADIUS / HWTACACSSimplifies switch security management by utilizing a password authentication server.MAC-based AuthenticationThe client is authenticated by the RADIUS server based on the device's MAC address.
L2 features
16K MAC Address TableSupports a large number of Layer 2 devices.10GbE Port AggregationAllows ports to be grouped together to increase the total data throughput to a remote device.VLAN Support and TaggingSupports the IEEE 802.1Q standard, offering up to 4094 VLAN IDs and 512 simultaneous VLANs.
L3 features
Address Resolution Protocol (ARP)Determines the MAC address of another IP host on the same subnet; supports static ARP entries; gratuitous ARP enables the detection of duplicate IP addresses; proxy ARP allows standard ARP operation between subnets or when they are separated by a Layer 2 network.Domain Name System (DNS)Provides a distributed database that translates domain names to IP addresses, simplifying network design; supports client and server modes.Dynamic Host Configuration Protocol (DHCP)Simplifies the management of large IP networks; supports DHCP server, DHCP client, DHCP relay, and rogue DHCP server detection (DHCP Rogue Server Check).
Chassis type
Rack
Fan
No
Power supply
External
Power consumption
38
Environment requirements
Operating temperature: -5°C to 50°C Operating relative humidity: 5% to 95%, non-condensing
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent